Contact Us
TEL : +86-22-83835857
Fax: +86-22-28428089
E-mail: admin2@co-working.com.cn
Add: 2-2702 Jingcai Mansion Dagunan Road No.459 Hexi District, Tianjin China
Web:www.cwksteelpipe.com
Home > Knowledge > Content
E355 215 235 En10305-1 Seamless Steel Pipe for Automobile
Dec 30, 2017

Basic Info

  • Technique: Cold Drawn

  • Surface Treatment: Oiled

  • Section Shape: Round

  • Wt: Sch40 Sch80

  • Steel Grade: E215 E235 E355

  • Main Market: Asia, Middle East, Europe, etc.

  • Transport Package: Woven Bags

  • Origin: China

  • Type: Seamless

  • Material: Carbon Steel

  • Usage: Hydraulic/Automobile Pipe

  • Od: 6-68mm

  • Length: as Customer Request

  • Delivery Time: 30-50 Days

  • Specification: 6-68MM

  • HS Code: 7304391000

Product Description

Product Description

Automobile and motorcycle precision pipe is mainly used in processing,production of automobile and motorcycle
shock absorber,bushing,oilcylinder,needle bearings and other parts.
 
The hydraulic cylinder tube is the main part of the hydraulic cylinder.The inner hole of the hydraulic cylinder tube 
usually precision processed by boring,reaming,rolling or honing.By these process can ensure the piston,sealing elements 
and the support elements move smoothly,then ensure the sealing effect and reduce the abrasion.The hydraulic cylinder 
tube will bear big pressure,so need high strength and stiffness.


Material Comparison 

 

Product NameE215 steel pipeE235 steel pipeE355  steel pipe
chemical analysisC:≤0.10;Si:≤0.05;Mn:≤0.70;P:≤0.025; S:≤0.025;Al:≤0.025C:≤0.17;Si:≤0.35;Mn:≤1.20;
P:≤0.025; S:≤0.025
C:≤0.22;Si:≤0.55;Mn:≤1.60;
P:≤0.025; S:≤0.025
Tensile Strength+C,≥430MPa; +LC,≥380MPa;+SR,≥380MPa;
+A,≥280MPa;+N,290-430MPa
+C,≥480MPa; +LC,≥420MPa;+SR,≥420MPa;
+A,≥315MPa;+N, 340-480MPa
+C,≥640MPa; +LC,≥580MPa;+SR,≥580MPa;
+A,≥450MPa;+N,490-630MPa
Yield strength+SR,≥280MPa; +N,≥215MPa+SR,≥350MPa;
+N,≥235MPa
  +SR,≥450MPa; +N,≥355MPa
StandardEN10305-1
LengthAs customer's request
PackagingStandard export packing, packed in woven bags, with two nylon slings, or can be customized as request
Heat Treatment/      Delivery Condition
  1. Cold finished (hard)   BK(+C)

Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation
  1. Cold finished (soft)    BKW(+LC)

The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding)
  1. Cold finished and stress-relieved annealing BKS(+SR)

Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree.
  1. Annealed    GBK(+A)

The last Cold forming process is followed by annealing in a controlled atmosphere.
  1. Normalized   NBK (+N)

The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
Delivery TimeWithin 35-50 days from receiving deposit
Payment Term100% L/C at sight or 30% deposit, 70% balance against copy of B/L
Usage/ApplicationPipes for automobile and motorcycle
Main MarketAsia, Middle East, Europe, etc.


Web: www.cwksteelpipe.com          

Email: admin2@co-working.com.cn


Previous: Butt Welded Carbon Steel Pipe Fitting Reducer

Next: Customerized Full Sizes Welded Steel Pipe